New: instruments with Hub 1.37.0, 3D replay, instrument approach grading and water landings

With Hub 1.37.0 (update to get these on your new flights):

  • PFD and engine gauges: attitude, airspeed, altitude, VS and heading, plus RPM and manifold pressure (or N1 and RPM), during your approach and in the 3D replay.
  • Flaps and gear: shown on the instruments and called out as you change them (“Flaps 3 · 640 ft”).
  • Wind: direction, strength and crosswind on your approach and landing.
  • Your real attitude in 3D: pitch, bank and heading, so a crosswind crab shows.
  • “At touchdown”: airspeed, pitch, bank, crab, wind and flaps at the moment you land.
  • Finer logging near the ground: a point every second, so your touchdown is placed more accurately.

New for every flight:

  • 3D replay. Watch your approach and touchdown in 3D, with glide-path gates, working PAPI lights and your aircraft type. Export video now has a 3D option for Reels, TikTok and Shorts.
  • Instrument approaches. Fly a published approach at one of 3,000+ US airports and you get an Instrument approach tab:
    • the procedure on a map with your track over it
    • your altitude profile against the restrictions
    • a grade to FAA checkride standards: altitudes ±100 ft, course and glide path within ¾ scale, airspeed ±10 kt

    Look for the IFR chip on the feed and the new Best instrument approach leaderboards.

  • Water landings. Amphibians and floatplanes landing on water get their own grade, plus a splash in 3D.
  • Feed. Every flight shows its Approach score, and the feed now lists flights in upload order.

Notes:

  • Instrument approaches are US only.
  • ILS and RNAV approaches to the same runway are named together, since the track looks the same.
  • Minimums are standard values, so check the plate.

12 replies

  • Bill Wells · Oct 22

    Just... Wow! This is a fantastic addition to the flight analysis. Can't wait to test it out.

    1

    Stan Anderson · Oct 22

    Thank you Bill! Please let us know what you think.

  • Bill Wells · Oct 28

    I made a flight with the new FSB Hub on the 23rd, and I think the new replay features are impressive.

  • Bill Wells · Oct 29

    I'm not sure if it changed in 1.37 or 1.38, but I see the flight times are now recorded in UTC from the in-sim clock. I flew today from KPNS to KMDH and used time acceleration at cruise. My actual landing time was about 14:30 UTC, and FSS logged it as 15:32 UTC. This is as it should be. Thanks!

    Stan Anderson · Oct 30

    You got it, it was added in 1.38 release! I'm glad you noticed and I've passed the feedback.

  • D

    DaveLS · Nov 7

    Should instruments approaches be hand flown or is autopilot acceptable? I assume that they be hand flown.

    Stan Anderson · Nov 7

    Autopilot is totally fine, you can normally see where it was AP vs where it was hand flown.

    Bill Wells · Nov 7 · edited

    Depends on your goal.
    If your aim is to improve your flying skills, I recommend hand flying your approaches. This is sometimes easier in slower aircraft such as Cessna 172 or Cirrus 22 as they usually handle better and don't require you to fly as far ahead as something with a faster approach speed. By flying manually ofen and early, you'll also build the skills necessary to fly faster and more complex aircraft when conditions require.
    However, if your not using flight sims to train, then using the autopilot as much as you can is obviously fine. Just remember, AP won't actually land for you. You still need to disengage and fly the last bit to touchdown. Depending on the aircraft and the hardware you're using, this could introduce serious issues as you switch from AP to manual controls.

    D

    DaveLS · Nov 7

    @Stan Anderson Stan how do you see the difference?

  • D

    DaveLS · Nov 7

    I would like to compare my hand flying to others’ hand flying not to the autopilot. How can I tell the difference?

  • hardware1197 · Nov 12

    Runway centerline and threshold locations much improved!

    1

    Stan Anderson · Nov 13

    Thank you!

Sign in to reply.